New three piece SJC Glock Frame Weights are available for both compact frame Glocks, and small frame/large frame Glocks.
Work great for 9 mm, .40 cal, .357 sig, 10mm, and .45 cal Glocks like the G19, G23, G32, G38, G45, G17, G22, G34, G35, G24, G17L, G24, G20 and G21s
black oxide finished.
post Nov 2018 3 piece models:
- fit Gen 3, Gen 4, and gen 5 pistols.
- Accepts optional SJC thumb rest kit for frame weights
- add 6 oz of muzzle flip controlling weight to the front of your pistol but does not increase recoil causing cyclic mass.
- legal for USPSA, and Steel Challenge Limited and Open divisions as well as IPSC Standard Division.
- provide massive benefit to recoil control and even provides for a standing pistol on table start position depending on the stage wording.
- Glock models will fit in Redeye Tactical frame weight holsters available/found under the "other manufacturers" section of our home page.
fit CR-Speed World Shoot II holsters with minor modifications like sanding. Original Ghost holsters require a more in depth modifications that we can perform for a fee if you send in your holster. Double Alpha Holsters and "the one" by ghost currently do not work with SJC frame weights.
one user also installed on a CZ P10C, see photos
39 Reviews Hide Reviews Show Reviews
These are very well made weights they fit the model 35 and 41 flush, they balance the muzzle flip very well, I am very pleased with the purchase
Overall I like it.wished instructions a little more detailed about extra holes and set screws. Either they are spares and need not be installed,orfully installed like the primary ones.
I put the frame weight on my Glock 24 with a lightened slide. The gun has very little rise shooting limited major in Uspsa. The weight was very easy to mount and secure.
Got this frame weight for my dad who had a stroke 10 years ago. He doesn't have a great deal of strength or dexterity in his hands. He bought a Glock 17 but was having feed issues and jams on every single shot due to muzzle flip because of the stroke issues. Installed the weight and the thumb rest/post and every shot works just fine now. He is EXTREMELY happy now. Great product Great quality. Thank you SJC!
I recently added some performance enhancements to a brand new Glock 34 Gen 4. I have always wanted a bit more weight up front, this weight gave it the balance I was looking for. Finally, truly Glock Perfection.
I bought two of these. One for Open and one for Limited. Yes, it mounts so it isn't perfectly level. The forward portion actually is slightly lower than the rear portion. So for people that are into aesthetics, then this might bother them a bunch. I care about functionality, not looks. I drilled little indents to ensure the mounting screws gripped onto the aluminum mounting plate. I also used loctite. So far so good. I'll eventually try the Vogel special (Gutted and Leaded Glock Tactlite) and see which I'll prefer, but for now if you want to check out the frame weight in action see my video here: https://www.facebook.com/video.php?v=398014447037176&set=vb.378334629005158&type=2&theater
This product has been upgraded. On some forums you will read that the set screws don't hold, etc. If you follow the directions from SJC and understand them it is a very easy installation that works. The fit and finish is amazing! I added this and the heavy magwell from SJC and the overall feel and most importantly the recoil reduction is just amazing. I did order a CR Speed holster and I had to make 2 modifications. I had to dremel down the base holder and drill a hole for the barrel to fit properly into the holster. It isn't the end of the world, and with a dremel and drill this can be done in minutes. All in all I am happy with this product.
As others have said, this weight really helps control muzzle flip. Since the prior reviews have been written the instructions appear to have been updated, since my instructions included the steps to dimple the aluminum plate and use loctite. It was also blued instead of in the white, which is a big improvement.
The frame weight makes a dramatic difference in recoil and muzzle flip. Once coated in your favorite finish it doesn't look to bad either. Keeping it in place and level...well that is a different story. I found that once installed and level to keep it locked solidly in place you must run a slightly smaller diameter drill through all the screw holes and make a small indention into the metal plate for each screw to get a good solid purchase into the aluminum mounting plate. Once this is done a drop of blue Loctite on each screw and just enough tension on the screws to get their nose solidly into the drilled indentions. This will lock the weight in place without any further movement no matter what power factor you are shooting. I took the extra star in this review for the time and trouble to make the weight solid on its mount. It really makes a huge difference in the feel and recoil recovery so it is well worth the extra star.