Created with Sketch. Created with Sketch.

M&P Products

  • SJC C-more Side Ways Mount

    SJC C-more Side Ways Mount

    SJC Side Ways C-more Mount:Models available for the following frames: G17, G34, G17L, G22, G35, G24.G20, G21,G31,G37, 9mm M&P, 40 s&w M&P The SJC Side Ways C-more Mount allows installation of a c-more slide ride optic...

    Choose Options
  • SJC Micro Dot Mount for M&Ps

    Micro Dot Mount for the M&P, allowing sights like the Doctor, J-Point, Fast Fire, or Delta Point to be mounted on a SJC fixed platform, requires installation of supplied bushings into frame, comes with directions and all screws and even a...

    Choose Options
  • SJC Heavy Weight Mag well

    SJC Heavy Weight Mag well

    SJC Heavy Magwell for Glock and M&P full size framed pistols 3 1/2 times heavier than our regular aluminum magwells. 8 oz for Glock models. Provides faster reloads, consistent hand/grip positioning, and significant recoil control. SJC Glock Mag...

    Choose Options
  • SJC Full Size M&P  Frame Weight

    SJC Full Size M&P Frame Weight

    SJC M&P Frame Weight (Photo is of a no longer available but similar style frame weight on a glock) black oxide finish for full size models having an accessory rail.   Adds 6.3 oz of muzzle flip controlling weight to the front...

    Choose Options
  • SJC Major 9mm 11 Port Aluminum Compensator

    Latest Flatest Shooting SJC 9mm Aluminum Compensator, Five up ports for flatness and three ports per side for maximum stability of dot, Major 9mm loads push gas through each and every port for a real competitve advantage, Fits barrels threaded 9/16" 32 t...

    Choose Options
  • SJC 9mm Compensator 5 port Aluminum

    SJC 9mm Compensator 5 port Aluminum

    SJC 9mm 5 port Aluminum Compensator; requires threaded barrel, locks in place using high temp loctite (#271), Contours fit well and look good on Glocks, M&Ps, and XDs.  Designed for threaded barrels with the threading starting at the end...

    Choose Options
  • Glock 3rd gen small frame Glock 3rd gen small frame

    SJC Aluminum Magazine Wells

    SJC Magwells for:Small Frame Glocks or M&P (shown in Silver with the butt plug required for the Glock)Machined Aluminum, natural aluminum/silver finish or anodized black, extremely large mag mouth, outside footprint...

    Choose Options
  • SJC Thumb Rest kit for frame weight

    SJC Thumb Rest kit for frame weight

    Thumb rest for SJC frame weights with threaded thumb rest mounting holes. silver, or black anodized, left and right hand dominant models  fit all post Nov 2018 SJC frame weights  Pre Nov 2018 SJC Glock or M&P frame weights without...

    Choose Options
  • Glock and M&P slide rackers for rear sight dove tail Glock and M&P slide rackers for rear sight dove tail

    SJC Slide Racker

    SJC Slide Rackers now fit the: Glock, M&P full size, M&P core, XDs, and Buck Mark Pistols. Centerfire models install in your slide's rear dove tail sight notch, and the rimfire Buck Mark model requires you to drill and tap a hole in your...

    $25.00 - $37.50
    Choose Options
  • SJC Extended Mag Button

    SJC Extended Mag Button in Stainless Steel You won't need to rotate your grip to drop your magazine anymore. Requires that you drill and tap your magazine release #6-32tpi. Complete Kits for Glocks having the drilled and tapped magazine catch are...

    Add to Cart
  • Replacement Screws and Bushings

    Replacement screw sets include two special manufacture, hardened trigger pin screws and four front screws used on all SJC dot sight mounts. One set is included with each mount purchase.Front screws install using a 2.5mm allen wrench. Frame bushing are...

    Choose Options