Fixed Mounting Platform designed to use Micro Dot Sights like the Burris Fast Fire, Doctor, or J-Point designed specifically for full size 40 cal guns, but works great on 9mm, 10mm, and 45 cal full size models. Eliminates the need to lower ejection ports or tune the ejection patterns just to avoid jams. Now you can build 40 cal open Glocks that will function as consistently as they did out of the box. Fits: G34,G35, G17,G22, G21, G20, G31, G37
Over the years, many people have wanted SJC to convert their 40 cal Glocks to open pistols, so they could shoot USPSA major power factors with factory ammo. Unfortunately, the 40 cal Glock's ejection patterns have proved to be difficult to consistently tune leading to stove pipe jams if using C-mores or mounts that extend back over the ejection port. Now, S & J Customs has a manufactured cure. The SJC Glock Micro Dot Sight Mount eliminates the need to tune ejection patterns or even lower ejection ports, but still allows a dot sight to be on a non-moving platform. USPSA major power factors can be acheived with regular 40 s&w factory ammunition. There is now a more affordable method to break into the major power factor open divisions with out having to reload. We believe that the benefits of the SJC Glock Micro Dot Sight Mount along with the SJC 40 caliber 5 port Aluminum Compensator benefit the customer and the shooting sports. Just like the original SJC Glock C-more Mount, the SJC Glock Micro Dot Sight Mount fit the common speed holsters with out any modifications.
SJC 3 piece gen 2 Modular Microdot Mounts accept the following sights: Burris Fast fire 2&3, Delta Optical Minidot I & II, Doctor/Noblex, Hawke Vantage, Leica Tempus, MAKDOT 1 X 25, Meopta Meosight III, C-more STS, C-more STS2, C-more RTS & 2, Delta Optical Minidot HD 24 & 26, Kahles Helia RD, Leupold Delta Point Pro, Holosun 407K & 507K, HS407C, HS507C, HS508T, Sightmark Mini Shot M-spec,Sig Sauer Romeo3 1 X 25, Shield RMS, Shield RMSc, Shield RMSw, Shield SMS, Trijicon RMR, Vortex Viper and Venom, Vortex Razor, VOMZ Pilad 1 X 20,
10 Reviews Hide Reviews Show Reviews
Okay, take a deep breath, Grab a drill and a dremel tool, then put this little beauty on your Glock. Moving VERY slowly this took me about 5 hours to mount, carefully relieving the frame to install the insert bushings just over the front of the trigger guard. Once installed the mount is rock-solid. I attached a Burris Fastfire and one note is that the mount is threaded for M3 screws, so the factory Burris screws were easily replaced after a quick trip to Ace Hardware. I bought mine unfinished and had cerekote applied. The unfinished piece is rough, lots of machine marks and not polished at all. Instructions were OK, but pictures or a video would have relieved some anxiety before performing major surgery in the serialized part of a handgun! I prefer a non-reciprocating red dot for fast shooting, and this sturdy, light mount fits my needs.